Call Us: 407.437.5805 info@homeshapeinspections.com
HOMESHAPE Inspections
  • Home
  • Your Home Inspection
  • Your Report
  • Resources
  • About
  • For Agents
  • Services & Fees
    • New Build Complete Inspection
    • Pre-Drywall Inspection
    • Buyers Home Inspection
    • Pre-listing Home Inspection
    • Final Home Inspection
    • 11 Month Warranty Inspection
    • Hurricane Damage Inspection
  • Contact
  • Schedule Your Inspection
  • Menu Menu

What is a GFCI and Why is it Required?

Home Inspections
GFCI Outlet
Table of Contents
The Home Inspection Comment Explained
What is a GFCI?
How does a GFCI work?
Why is a GFCI required near sources of water?
Understanding the Cost of GFCI Outlets?
What’s the difference between an GFCI outlet and a breaker side GFCI?
Which type of GFCI is better: outlet or breaker side?
The Conclusion About Ground Fault Circuit Interrupters

As an Orlando homeowner, you may have come across the term GFCI while doing electrical work around your house. But what exactly is a GFCI and why is it required near sources of water? In this article, we’ll discuss what a GFCI is, how it works, and why it’s required near sources of water. We’ll also explain the difference between an outlet GFCI and a breaker side GFCI.Ground Fault Circuit Interrupter GFCI Outlets

The Home Inspection Comment Explained

As home inspectors, we often note in our inspection reports when Ground Fault Circuit Interrupters (GFCIs) are missing, damaged, or need corrective action. While these comments may seem like maintenance suggestions, it’s essential to hire a licensed electrician for any GFCI repairs or installations. Installing GFCIs is not a DIY project, as it requires specialized knowledge, tools, and materials to ensure that they function safely and correctly. If you need assistance finding a qualified electrician, don’t hesitate to reach out to your home inspector for recommendations on local contractors to use.

Missing GFCI protection – A missing GFCI protection defect occurs when a source of water is not protected by a GFCI. This increases the risk of electrical shock or electrocution, especially in the case of a device falling into the water. This is commonly found in bathrooms, the kitchen, outdoor receptacles, or garage.

Inadequate GFCI protection – Inadequate GFCI protection occurs when a GFCI is not installed in an area where it’s required or when the GFCI is not powerful enough to protect the electrical devices that are connected to the circuit.

GFCI Wont Reset – A GFCI won’t reset defect occurs when the GFCI, or Ground Fault Circuit Interrupter, will not turn back on after it has been tripped. This defect can be caused by a number of factors, including a malfunctioning GFCI, a damaged electrical circuit, or an overloaded circuit. When a GFCI trips, it automatically shuts off the power to prevent electrical shock or electrocution. To reset the GFCI, you simply press the reset button. However, if the GFCI won’t reset, it indicates that there is an underlying issue that needs to be addressed.

GFCI Not Testing Functional – A GFCI tester is a small, handheld device that is used to test the function of a GFCI. The tester is plugged into the electrical outlet and, when activated, sends a test signal to the GFCI. If the GFCI is functioning properly, it will trip, shutting off the power to the outlet. If a GFCI won’t function, the GFCI tester will indicate this by not tripping the GFCI when the test signal is sent. This is a clear sign that there is a problem with the GFCI, and it should be replaced as soon as possible.

GFCI Improperly Wired – An improperly wired GFCI defect occurs when the Ground Fault Circuit Interrupter (GFCI) is not wired correctly, making it unable to function properly and increasing the risk of electrical shock or electrocution. A GFCI tester can be used to detect this defect by plugging it into the outlet and seeing if the GFCI trips when a test signal is sent. If it doesn’t trip, the GFCI tester will indicate that the GFCI is not properly wired. It is important to have a licensed electrician inspect the electrical system to correct the issue.

What is a GFCI?

GFCI stands for Ground Fault Circuit Interrupter. A Ground Fault Circuit Interrupter (GFCI) is a type of electrical safety device that is designed to protect people from electrical shock or electrocution by quickly shutting off power to an electrical circuit when it detects an imbalance between the hot and neutral wires. GFCIs are commonly used in homes, especially near sources of water, such as bathrooms, kitchens, and outdoor areas, to prevent electrical accidents and protect people from harm.

How does a GFCI work?

A GFCI, or Ground Fault Circuit Interrupter, works by constantly monitoring the electrical current flowing through an electrical circuit. The GFCI has two separate circuits: one that carries electrical current to the device and another that measures the current flowing back to the source.

If the GFCI detects a difference between the current going out and the current coming back, it assumes that there is a ground fault or an overloaded circuit, and it quickly shuts off the power. This helps to prevent electrical shock or electrocution, which can occur when electrical current escapes from the intended path and flows through a person’s body.

A ground fault can happen when an electrical device comes into contact with water, for example, and the current flows through the water instead of back to the source. An overloaded circuit occurs when too much electrical current is flowing through the circuit, which can cause wires to overheat and potentially start a fire.

In conclusion, a GFCI works by constantly monitoring the electrical current flowing through a circuit and quickly shutting off the power if it detects a dangerous electrical fault, such as a ground fault or an overloaded circuit. This helps to protect people from electrical shock or electrocution and prevent fires.

Why is a GFCI required near sources of water?

Sources of water, such as sinks, toilets, and bathtubs, pose a significant risk of electrical shock or electrocution. If an electrical device, such as a hair dryer or radio, were to fall into the water while it was being used, the electrical current could travel through the water and into the person who’s in the water. GFCI protection is important for garage and outdoor receptacles because these areas are often near sources of water, such as sinks, hoses, and pools. A GFCI is required near sources of water because it will detect the flow of electrical current through the water and shut off the power before it can reach dangerous levels.

Understanding the Cost of GFCI Outlets?

Ground Fault Circuit Interrupters (GFCIs) are an important safety device designed to protect people from electrical shock or electrocution. If you are looking to install GFCIs in your home, it is important to consider the cost of the outlets as well as the cost of installation.

The cost of a GFCI outlet can vary depending on several factors such as the brand, type, and location. On average, a basic GFCI outlet can range from $10 to $30, while a higher-end, smart or decorative model can cost upwards of $50.

It’s also important to note that the cost of installation will vary based on the complexity of the job and the electrician’s hourly rate. To ensure that you are getting a fair price, it’s always best to get multiple quotes from licensed electricians.

Ground Fault Circuit Interrupter (GFCI) Breaker By Square D

What’s the difference between an GFCI outlet and a breaker side GFCI?

There are two types of GFCIs: GFCI outlets and breaker side GFCIs. An outlet GFCI is a type of electrical outlet that has a GFCI built into it. It’s designed to protect people from electrical shock and electrocution by detecting a difference in electrical current flowing through the circuit and automatically shutting off the power if it detects a dangerous electrical fault. An outlet GFCI can be installed anywhere, but it’s typically installed in areas that are near sources of water, such as bathrooms, kitchens, and outdoor areas.

A breaker side GFCI, on the other hand, is a type of GFCI that’s installed at the electrical panel. It protects all the electrical devices that are connected to the circuit by detecting a difference in electrical current flowing through the circuit and automatically shutting off the power if it detects a dangerous electrical fault. A breaker side GFCI is typically installed in older homes that don’t have outlet GFCIs installed.

Which type of GFCI is better: outlet or breaker side?

Both types of GFCIs are effective in protecting people from electrical shock and electrocution. The type of GFCI that’s best for your home depends on several factors, including the age of your home, the location of the electrical devices, and the number of electrical devices that are connected to the circuit.

If your home is newer and has outlet GFCIs installed, it’s best to continue using outlet GFCIs. Outlet GFCIs provide more protection because they’re located closer to the electrical devices that are being used. This means that they can detect a dangerous electrical fault faster and shut off the power before it can reach dangerous levels. Outlet GFCIs are also easier to test and reset, which is important in case of a power outage or other electrical emergency.

If your home is older and doesn’t have outlet GFCIs installed, a breaker side GFCI may be the better option. This type of GFCI provides protection for all the electrical devices that are connected to the circuit, so it’s a more comprehensive solution for homes without outlet GFCIs. However, it’s important to note that breaker side GFCIs can be more difficult to test and reset, so it’s important to have a professional electrician install and maintain them.

The Conclusion About Ground Fault Circuit Interrupters

In conclusion, a GFCI is an important electrical safety device that protects people from electrical shock and electrocution. Whether you have an outlet GFCI or a breaker side GFCI, it’s important to have this device installed near sources of water to protect yourself and your family. If you’re unsure about which type of GFCI is best for your home, contact a licensed electrician for advice.

February 2, 2023/0 Comments
Share this entry
  • Share on Facebook
  • Share on X
  • Share on WhatsApp
  • Share on Pinterest
  • Share on LinkedIn
  • Share on Tumblr
  • Share on Vk
  • Share on Reddit
  • Share by Mail
https://homeshapeinspections.hosting4.spectora.com/wp-content/uploads/sites/80/2023/02/Ground-Fault-Circuit-Interrupter-GFCI-.png 630 1200 https://d2mejsoa8tvo2o.cloudfront.net/wp-content/uploads/sites/80/2022/09/27224920/HOMESHAPE-Inspections-new-logo-e1662777555884.png 2023-02-02 06:02:192023-02-02 06:02:19What is a GFCI and Why is it Required?
0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Latest Posts

  • unnamed 2
    How Much Does a Home Inspection Cost in Florida?August 16, 2023 - 2:00 pm
  • GFCI Outlet
    What is a GFCI and Why is it Required?February 2, 2023 - 6:02 am
  • Man installing gutter system
    All Around the House: Gutter System Right For You?January 27, 2023 - 6:43 am
  • building permit search
    Florida Building Permit SearchJanuary 1, 2023 - 11:59 am
Scroll to next section Scroll to next section

You’re not just buying an inspection.

You’re buying peace of mind.

Schedule Today

Scheduling Your Inspection Has Never Been Easier

Military, Veterans & First Responders Offer – $100 Off for Comprehensive Home Inspections

Thank you for choosing HOMESHAPE Inspections! Call 407.437.5805 for a quote, or schedule completely online below!

When you schedule your home inspection online, you will receive a confirmation email.

Proudly Providing Home Inspection Services for Orlando

HOMESHAPE Inspections provides inspections, including Pre-Drywall Inspection, New Construction Inspection, 11-Month Warranty Inspections, Mold Inspections, Mold Testing, Buyers’ Comprehensive Home Inspections, Pre-Listing Inspections, Investor Inspections, Walkthrough Consultations, Four-Point Inspections, Wind Mitigation Inspections, and more. We proudly serve: Orlando • Sanford • Lake Mary • Heathrow • Winter Park • Casselberry • Oviedo • Winter Springs • Altamonte Springs • Apopka • Lake Hart • Bay Hill • Winter Garden • Wedgefield • Belle Isle • Kissimmee • Lake Nona • Montverde • Oakland • Windermere • Surrounding Areas

Contact Us

We love hearing from you anytime!
Call, text or email us if you have any questions or use the online scheduler to set up a home inspection.

407.437.5805

info@homeshapeinspections.com

Trusted & Licensed

ashi badge edited fabi e1660790959134 certified master inspector badge

  • Licensed & Experienced

    Certified Professional Inspector: NACHI21102505
    Florida State License Number: HI14463
    American Society of Home Inspectors MEMBER ID: 268997
    FABI MEMBER Florida Association of Building Inspectors
    InterNACHI Orlando Chapter Founder

Military, Veterans & First Responders Offer – $100 Off for comprehensive home inspections

© Copyright HOMESHAPE Inspections | Website by Spectora | Privacy Policy
  • Link to Instagram
  • Link to Facebook
Link to: All Around the House: Gutter System Right For You? Link to: All Around the House: Gutter System Right For You? All Around the House: Gutter System Right For You?Man installing gutter system Link to: How Much Does a Home Inspection Cost in Florida? Link to: How Much Does a Home Inspection Cost in Florida? unnamed 2How Much Does a Home Inspection Cost in Florida?
Scroll to top Scroll to top Scroll to top
custom logoHOMESHAPE InspectionsHOMESHAPE Inspections
5.0 Stars - Based on 100+ User Reviews
×
Tony Tagliareni5/17/2025
Howard is very professional and made the whole process very easy. Highly recommend!
read moreread less
Google Logo
April Engel5/09/2025
Mr Burch was very professional throughout the inspection process. He took the time before and after the inspection to explain the inspection process and report details.He made some great safety upgrades recommendations and offered his help with any question(s) we may have in the future.I definitely recommend Howard as a home inspector.
read moreread less
Google Logo
Jacob Hacker4/26/2025
Howard is a great home inspector his attention to detail is very good and his knowledge on most subject manners is really good. Additionally all the questions I had he was able to answer even if they didn’t necessarily directly relate to the inspection.
read moreread less
Google Logo
Gil Alicea4/23/2025
Excellent customer care and very friendly. Howard helped me make a decision on whether or not to proceed with a property and I feel much better about my decision now. Thanks Homeshape!
read moreread less
Google Logo
David4/06/2025
Great experience. On time, and very professional. I’ll definitely use them again.
read moreread less
Google Logo
Glen Roebuck3/25/2025
Very through. Found a damaged roof tile and made other suggestions. Included plenty of photos and videos. Would highly recommend.
read moreread less
Google Logo
Jackie Martinez3/22/2025
Mr Burch was very thorough on his inspections. He took the time to explain every detail and answered every question and concens that we addressed. We were very pleased that he was introduced to us and we are confident that you would be as pleased as us to have him conduct your inspection.
read moreread less
Google Logo
Daniel Jagjit3/10/2025
Howard was fantastic! He did our pre drywall inspection and our final inspection before closing. I can’t say enough how much I recommend him to do any inspection you may need. He was at our house from 8am until 5pm making sure everything was covered before we closed. His reports are also very easy to understand and detailed. I highly recommend him for any inspections but specifically a new construction. There are so many small things that get missed by the builder and Howard catches them all.
read moreread less
Google Logo
Anne Skurnick3/10/2025
Howard is top notch! Never fails to take calls no matter what. Did my pre-drywall inspection in a day's notice and found a few items that were definitely missed by the builder. His reports are detailed including pics and video. He uses drone technology to see things that he's unable to access. I am beyond thrilled that I hired his company and will recommend that anyone looking for an inspector in the Orlando area to not even hesitate to hire him. He's worth it!!!
read moreread less
Google Logo